Contact Sales 0800 970 4190

Fire Sleeve – Ducting

Ducting

Fire Sleeves prevent the spread of fire where plastic pipes or plastic ducts penetrate fire compartment walls.

QRS110/54,QRS205/60,QRS220/90,QRS110,QRS130,QRS 75,QRS 90*

Features & Benefits

Tested to BSEN 1366-3: 2009
Tested with Uncapped/Uncapped (U/U) duct configurations as required for ventilation ducts
Up to 2 hour fire rating
Suitable for masonry walls or plasterboard partitions
Suitable for insulated and non-insulated partitions
Can be retrofitted
No mechanical fixings required
Robust galvanised steel shell
Performance unaffected by weathering (Type X Durability)

Technical Information

Product Codes and Specific features

Building Regulations impose limitations on all pipes passing through fire compartment walls and floors. QRS Intumescent Fire Sleeves allow plastic ducts to meet the requirements of the Building Regulations. QRS Intumescent Fire Sleeves have been tested according to BSEN 1366-3: 2009 where various plastic duct sizes have met insulation and integrity criteria for this standard for up to 2 hours.

The QRS Intumescent Fire Sleeves consist of a flexible galvanised steel shell containing graphite based intumescent material.
They are manufactured to suit flat ducts of 110x54mm, 204x60mm, and 220x90mm. And round ducts with 100mm and 125mm overall diameter.

Tested to Type X durability which means the QRS Fire Sleeves can be installed in conditions exposed to weathering. QRS CE/UKCA Marked Fire Sleeves are expected to last the lifetime of the building.

The QRS Intumescent Fire Sleeve should be placed around the ventilation duct, positioned centrally within the partition and should be flush or protrude from each face of the wall. The plasterboard should be cut to a tight fit around the QRS Intumescent Fire Sleeve, and any gaps should be sealed with the Quelstop Intumescent Acrylic Sealant, part number QSS310.

For all sleeve types, please refer to manufacturers installation guidance prior to system design or installation.

Product Code	Duct Size (mm)	Space needed around duct to ﬁt QRS Sleeve (mm)	Recommended aperture (mm)	QRS length (mm)	Fire Rating
QRS110/54	110 x 54	9	130 x 73	140	120 minutes
QRS205/60	204 x 60	9	225 x 80	180	120 minutes
QRS220/90	220 x 90	18	256 x 126	140	120 minutes
QRS110*	100	10	130	180	120 minutes
QRS130*	125	20	170	180	90 minutes
QRS 75	75 Semi rigid	8	90	140	120 minutes
QRS 90*	90 Semi Rigid	13	116	140	120 minutes